The riot control helmet is a kind of police equipment that protects police officers from head and face injuries or other potential injuries when performing official duties. The following editor of PASGT helmet will introduce to you its usage and what are the precautions?
1. How to use
1. Users should choose the appropriate product specifications for use according to their head size.
2. First open the mask lens to the top of the head, then use your fingers to pull the two sides of the wearer, and pull them apart to expand the opening.
3. Tilt the helmet forward so that the forehead of the head is put into the helmet first, and then pull down, so that the helmet is completely put in.
4. After the helmet is put on, shake the helmet back and forth to make the head comfortable to wear, and then adjust the wearing to the proper position and insert the buckle for a firm connection. Then pull down the mask lens to make the waterproof rubber strip of the mask fit tightly with the forehead of the shell.
5. When you want to take off the helmet, untie the helmet; that is, press the buckle on the helmet with your fingers and pull it apart to expand the wearing opening, and then take it off from front to back.
2. Matters needing attention
1. It must be worn tightly when in use.
2. Before use, please check that the waterproof rubber strip on the mask and the forehead of the shell should maintain a good degree of closeness.
3. Overall strength: It can only provide a certain strength of protection and reduce the damage caused to you. Therefore, when the helmet has experienced a major collision accident, it should be stopped immediately or sent to the factory for appraisal to confirm whether it can continue to be used.
4. Overall appearance: Do not smear the helmet body or use corrosive solvents to remove oil stains, so as not to damage the strength of the helmet body material.
The above is an introduction by the editor of PASGT helmet about the usage and precautions of riot control helmet. I hope you can learn more about it.